WHY USE INTAM™ FILAMENTS？

Polyether ether ketone is one of the best-performing plastics ever made. PEEK has excellent mechanical, thermal, and chemical resistance, making it the material of choice in some of the most demanding applications.

INTAM™ PEKK is made from Arkema Kepstan® ingredients. As the leading material in the PAEK family, it enhances the molecular chain of PEEK, reduces crystallization speed and melting point, and improves fluidity, making it more suitable for 3D printing.

The use of 10% high-modulus short-cut carbon fiber greatly improves the stiffness and heat resistance of PEEK. It is used in some of the most demanding applications in industries such as automotive, aerospace, defense, semiconductors, and oil/gas.

PEEK+GF10 fiber-reinforced PEEK has better mechanical and heat resistance properties than standard PEEK, while glass fiber reinforcement improves crystallization speed and surface quality. Additionally, glass fiber reinforcement provides better insulation.

INTAM™ PEI 1010 uses ULTEM™ 1010 resin from Sabic to manufacture this ultra-high-performance 3D printed filament. PEI 1010 has a higher thermal deformation temperature than PEI 9085, reaching 200°C. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, dimensional stability, inherent flame retardancy, and good chemical resistance.

PEI is an amorphous, high-performance polymer that combines excellent thermal properties, dimensional stability, inherent flame retardancy, and good chemical resistance. The resin is FAA-approved for FST applications (flame/smoke/toxicity) and complies with FAR 25.853 and OSU 65/65 standards.

PPS (polyphenylene sulfide) is a high-performance polymer with excellent chemical resistance, as well as excellent mechanical and thermal properties. PPS is completely insoluble in any known solvent at 200°C. It is inherently flame retardant and self-extinguishing, making it an ideal material for electrical and electronic applications.

PPSU is considered one of the highest-performing plastics in the industry. This high-temperature amorphous polymer has excellent heat and chemical resistance, making it ideal for demanding applications in automotive, aerospace, electronics, defense, industrial, medical, and semiconductor fields.

PC (polycarbonate) is a strong and transparent thermoplastic with characteristics of impact resistance, high rigidity, heat resistance, and flame retardance. INTAM™ PC's unique anti-warping feature makes it easier to print with dimensional stability, ideal for demanding production and prototype printing.

INTAMSYS® TPU is a highly flexible 3D printing material, Thermoplastic PolyUrethanes, with excellent printing quality. It has good elasticity and a large strain-to-failure.

PA12-CF is a carbon fiber reinforced PA12 (nylon 12) consumable. Compared to PA6, it is less sensitive to moisture. The carbon fiber reinforcement significantly enhances stiffness, strength, and heat resistance, while providing excellent interlayer bonding.

PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) consumable. Carbon fiber reinforced enables the material to have high modulus, improved chemical and heat resistance, excellent surface quality, and ease of printing.